Frazier & Son 6” x 10” Model CBT Bucket Elevator with max capacity

Model “CBT” Stainless Steel Closed Frame Bucket Elevator with 6” x 10” CBT-2 Opaque White Tritan Buckets

• Frame constructed with 12 gauge Type 304 stainless steel with a 2B mill finish
• Product contact points other than buckets are stainless steel, all welds in contact are ground smooth
• Heavy gauge stainless steel tubular legs have adjustable feet for leveling
• Legs provide 6” of clearance between the bottom of the elevator and the floor
• Feet are constructed with ¼” T304 stainless lag pads to properly secure elevator to floor
• Stainless steel drive frame mounted at the end of the upper horizontal section of the elevator
• Torque limiter protecting the conveyor and its users by limiting the torque transmitted in the drive system by slipping in the event of an overload or jam
• Carbon steel sprockets mounted to stainless steel shafts
• Long lasting, self-lubricating UHMW-PE chain guides throughout
• Premium carbon steel conveyor chain
• Spring loaded chain take-ups for fast and easy conveyor chain tensioning
• Anti-Back Drive
• Motor disconnect switch
• Hard-guarded sprocket guards protect from exposed teeth in the transition corners
• Hard-guarded end covers at the top and bottom ends
• Flat, bolted stainless steel covers enclose the top of the upper horizontal
• Hinged stainless steel doors with quarter-turn latches enclose the front and back side on the vertical section to allow access points for operators/maintenance.
• Slide out catch pans under bottom horizontal section of elevator
• Hinged catch pans with clean out doors underneath the upper horizontal section of the elevator
• Bolted stainless steel covers enclose the slotted section of the take-up assembly
• Heavy gauge sheet metal shields the infeed area of the conveyor
• NEMA 12 Enclosure
• Through-the-door disconnect switch
• Circuit breakers for main and branch circuit protection
• NEMA 4X operators (Allen Bradley 800H Series)
• Allen-Bradley Powerflex 525 VFD
• Allen-Bradley Micro820 PLC
• Input for scale high level control to automatically stop and start the elevator system
• Elevator pre-wired with wiring run through IMC conduit
• Controls are built to a CULUS standard
• Input for discharge high level control to automatically stop and start the elevator system
• Contact closure output to turn the upstream equipment on and off on demand
• Elevator pre-wired with wiring run through IMC conduit
• Safety package including safety interlocking switches at vertical access doors, discharge spout, and slide out catch pans under the bottom horizontal.
• Infeed vibratory feeder and storage hopper not included.
• Sold direct from Frazier & Son after review and approval of project parameters
• Includes 1 year manufacturer warranty
• Available immediately